ARI® valves in the general industry
Extreme temperatures, high pressures, aggressive media and often in use non-stop: when it comes to the safety, reliability and efficiency of industrial processes under demanding conditions, ARI-Armaturen provides the highest quality standards.
Whether heating or cooling: ARI® offers you the right valves for control, isolation, safety and steam trapping of liquid and gaseous media for the thermal handling of your process. ARI® also offers customised solutions for steam and condensate systems in modular design. In some cases, ARI® valves can also be used directly in your process medium (e.g. ammonia, oxygen, hydrogen).
Do you have a special requirement for which you are looking for a solution? We look forward to receiving your enquiry!
The right valve for every industry
Our valves and system solutions are used in these market segments, among others:
Your industry is not listed here? We look forward to your enquiry!
Product recommendations from ARI® for the general industry
Applications in detail
Even in the age of electronic data processing, paper production is an important market. ARI® supplies high-quality valves for companies in the paper and wood industries – both for the water loops and for the steam or heat transfer oil system.
The ARI® range includes grey cast iron, ductile iron, cast steel and stainless steel in pressure classes PN 16 to PN 40 and nominal sizes DN 15 to DN 500.
In addition to control, isolating and safety valves as well as steam traps, ARI-Armaturen offers CONA® Control, a permanent monitoring system for steam traps. This prevents energy losses and therefore cost increases and increases the efficiency of the systems.
For the best results including cost-saving heat recovery: In the building materials sector, ARI® supplies all plants with reliable valves that are used in the curing of sand-lime bricks and aerated concrete.
Our valves are designed to deliver high-quality results in autoclaves under steam pressure in a saturated steam atmosphere with a temperature of up to +200 °C.
The following ARI® products are used, among others:
- STEVI® electric and pneumatic control valves
- Electric and pneumatic globe valves
- Manual globe valves with bellows seal FABA®
- CONA® steam traps
- Triple offset metal-seated butterfly valves ZETRIX®
- ARI® blowdown valves
- SAFE safety valves
- ARI® strainers
- ARI® engineered systems
ARI-Armaturen offers companies in the textile industry a comprehensive range of products for all stages of their production process – from the boiler house to the steam or heat transfer oil system.
Whether for pre-treatment, dyeing, printing or finishing: ARI® products ensure efficient operation of your steam system. The range extends from globe valves and strainers to control valves and safety valves as well as complete engineered systems.
In a growth market such as the lithium-ion battery industry, reliable production is an immensely important success factor. In production processes where control accuracy is particularly important, ARI® valves are therefore the right choice.
We know that the quality of these valves and butterfly valves plays a particularly important role for our customers in the battery industry and that a failure can lead to a large amount of material waste. ARI® valves therefore not only have extremely high control accuracy – they are also particularly suitable for heating heat-sensitive materials. No leaks, high heat utilisation, high safety – ARI® offers all this.
The following ARI® products are used in the battery factory's coating production:
- Control valves with auxiliary energy STEVI®
- Globe valves with bellows seal FABA®
- Triple offset metal seated butterfly valves ZETRIX®
- ARI® strainers
Many industrial companies that process steel, aluminium, copper or other metals have been relying on ARI® valves for years. From converter systems to surface finishing and centralised water supply: ARI® offers you a wide range of components and systems that fulfil the high requirements in these areas. The range of flow media extends from cooling water, steam and condensate to argon, nitrogen, oxygen, emulsion or purified sodium sulphate.
ARI® offers you a wide range of components and systems that are already being used successfully in steelworks around the world for these processes:
- Control valves with auxiliary energy STEVI®
- Manual globe valves with gland seal STOBU®
- Manual globe valves with bellows seal FABA®
- Automated globe valves
- Soft-seated butterfly valves ZESA®/GESA®
- Triple offset metal seated butterfly valves ZETRIX®
- High performance valves with metallic sealing ZEDOX®
- CONA® steam traps
- SAFE safety valves
- ARI® strainers
- PREDU® pressure reducing valves
- PRESO® spring loaded pressure reducing valves
- PREDEX® excess pressure regulators
- TEMPTROL® temperature controllers
- ARI® engineered systems
And in the future? ARI-Armaturen also offers a broad product portfolio for hydrogen and oxygen applications for CO2-free steel production.
ARI® manufactures almost all valves that ensure the successful operation of your production facilities in the rubber and plastics industry. Whether in tyre production or PET processing: ARI® valves are extremely tight and work reliably – even under difficult environmental conditions.
For example, our valves are used in processes that use steam in various pressure and temperature ranges.
ARI® valves for the plastics processing industry:
- Control valves with auxiliary energy STEVI®
- Globe valves with bellows seal FABA®
- Steam traps CONA®
- SAFE safety valves
- Steam distributors/condensate collectors CODI®
- ARI® steam separators
- Pressure reducing valves PREDU®
- Check valves CHECKO®
- ARI® strainers
- Control valves with bellows seal
- Triple offset metal seated butterfly valves ZETRIX®
- ARI® engineered systems
For many years, ARI® has established itself as a valued partner for companies in the diverse automotive sector. Valves and system solutions from ARI® are used by our automotive customers in the energy centre or in the energy distribution of classic media such as hot water, steam and compressed air.
ARI® supplies LABS-free valves for special areas such as paint shops, which require valves that do not contain substances that can damage the paint. A major advantage here is that ARI® valves are always manufactured silicone-free. As an option and for particularly critical areas, our valves are specially cleaned, tested and packaged.
Valves from ARI® have proven themselves in the glass industry for decades. This is because they are not only suitable for production processes at temperatures of up to 1,600 °C, but also for all flow media used in the industry.
These products from our range are particularly popular in the industrial production of glass:
- GESA® soft seated butterfly valves
- High performance metal seated butterfly valves ZEDOX®
- Triple offset metal seated butterfly valves ZETRIX®
- Manual globe valves with gland seal STOBU®
- Manual globe valves with bellows seal FABA®
- ARI® strainers
- STEVI® control valves with electric and pneumatic actuators
- Control valves without auxiliary energy
- SAFE safety valves
- ARI® engineered systems
Highest quality standards for demanding applications: Our customers in the tobacco industry successfully control their production processes with ARI® valves. From the drying tunnel in the pre-treatment of tobacco to the baking process and flavouring.
ARI® offers a wide range of valves and systems that are optimised for this type of process:
- Manual globe valves with gland seal STOBU®
- Manual globe valves with bellows seal FABA®
- Soft-seated butterfly valves ZESA®/GESA® – also known as on-off valves
- ARI® strainers
- PREDU® pressure reducing valves
- STEVI® control valves
- SAFE safety valves
- CONA® steam traps
- Check valves CHECKO®
- CONLIFT® float operated condensate pumps
- CODI®️ condensate collector / steam distributor
- ARI® engineered systems
Companies from the mining industry have benefited from our close cooperation in production for many years. In potash and salt mining, for example, ARI® valves are successfully used to optimise processes – for steam generation, for the condensate system or in heat recovery, among other things.
Proven ARI® products for the mining industry:
- STEVI® electric and pneumatic control valves
- Electric and pneumatic globe valves
- Manual globe valves with gland seal STOBU®
- Manual globe valves with bellows seal FABA®
- CONA® steam traps
- High performance metal-seated butterfly valves ZETRIX®
- ARI® blowdown valves
- SAFE safety valves
- ARI® strainers
- ARI® engineered systems
For our customers in the semiconductor industry, stable humidity control in production is an important success factor. With valves from ARI®, they rely on reliable components to control their production facilities.
STEVI® control valves from ARI® offer efficient and reliable performance to ensure precise steam control in humidification systems. Together with globe valves, steam traps, engineered systems and other additional products, they ensure that the steam reaches the humidification system in the correct condition.
